Minutes, IBIS Quality Committee

20 Jan 2009

11-12 AM EST (8-9 AM PST)

ROLL CALL
  Adam Tambone
* Anders Ekholm, Ericsson
  Barry Katz, SiSoft
  Benny Lazer
  Benjamin P Silva
  Bob Cox, Micron
  Bob Ross, Teraspeed Consulting Group
  Brian Arsenault
* David Banas, Xilinx
* Eckhard Lenski, Nokia Siemens Networks
  Eric Brock
  Guan Tao, Huawei Technologies
  Gregory R Edlund
  Hazem Hegazy
  Huang Chunxing, Huawei Technologies
  John Figueroa
  John Angulo, Mentor Graphics
  Katja Koller, Nokia Siemens Networks
  Kevin Fisher
  Kim Helliwell, LSI Logic
* Lance Wang, IOMethodology
  Lynne Green
* Mike LaBonte, Cisco Systems
  Mike Mayer, SiSoft
* Moshiul Haque, Micron Technology
* Pavani Jella, TI
  Peter LaFlamme
  Randy Wolff, Micron Technology
  Radovan Vuletic, Qimonda
  Robert Haller, Enterasys
  Roy Leventhal, Leventhal Design & Communications
  Sherif Hammad, Mentor Graphics
  Todd Westerhoff, SiSoft
  Tom Dagostino, Teraspeed Consulting Group
  Kazuyoshi Shoji, Hitachi
  Sadahiro Nonoyama

Everyone in attendance marked by *

NOTE: "AR" = Action Required.

-----------------------MINUTES ---------------------------
Mike LaBonte conducted the meeting.

Call for patent disclosure:

- No one declared a patent.

AR Review:

- Mike look into MeetingPlace issues
  - Some problems had been experienced inside Cisco
  - WebEx should become available at some point

- Mike propose IBISCHK bug for 5.5.6
  - TBD

New items:

- Lance had sent email about checks for PullUp/Pulldown going through zero.
  - The checked for PullUp currents said PullDown in the text.
  - We corrected 5.3.11 to say Pullup
  - Pavani: Doesn't this apply only to full swing technologies like CMOS?
    - We fixed 5.3.10 & 11, adding "for full swing technologies such as CMOS".

5.4.2.	{LEVEL 2}  V-T table endpoints match fixture voltages
- Moved here from 6.2
- Moshiul:

Pavani: We could split 5.4.1 into separate checks

Next meeting:

27 Jan 2009 11-12 AM EST (8-9 AM PST)

Meeting ended at 12:04 PM Eastern Time.
